Austin Building Systems, Inc.
does not give out any information on your projects or inquiries to 3rd parties or marketing groups

Mini Storage Buildings

Wedge Anchors

WEDGE ANCHORS FOR MINI STORAGE
NO PRESETTING IN CONCRETE REQUIRED. THEY ARE SHIPPED WITH THE BUILDING.

Sample drawings only - not to be used for legal, architectural , erecting or permit drawings.

Dependable, Heavy Duty, Inspectable, Wedge Type Expansion Anchor

Description / Suggested Specifications
Wedge Type Anchors

Specified for anchorage into concrete.

Wedge anchors feature a type 18-8 stainless steel split expansion ring and a threaded stud bolt body and integral cone expander, nut and washer. Anchor bodies are made of plated carbon steel, hot dipped galvanized carbon steel, type 304 stainless steel or type 318 stainless steel as identified in the drawings or other notations.

The exposed end of the anchor is stamped to identify anchor length. Stampings should be preserved during installation for any subsequent embedment verification.

Use carbon tipped hammer drill bits made in accordance with ANSI B212.15-1994 to install anchors.

Anchors are tested to ASTM E488 criteria and listed by ICBO and SBCCI. Anchors are listed by the following agencies by the local building code: UL, FM, City of Los Angeles, California State Fire Marshal and Cal Trans.

Approvals / Listings

• Meets or exceeds U.S. Government G.S.A. Specification FF-S 325 Group II, Type 4, Class 1
• Underwriters Laboratories
• Factory Mutual
• ICBO Evaluation Services, Inc. - #ER-1372 (including seismic loading conditions)
• City of Los Angeles - #RR2748
• SBCCI Compliance Report - #9570
• California State Fire Marshal
• Cal Trans